1. Windows Xp On Usb Drive

I just want to transfer winnt32.exe over to the flash drive. The flash drive is like the disk that contains windows. In case the HD fails, I have windows xp on the flash drive so I can then reinstall it. Beezy Mar 10, 2014, 9:25 AM. If you want to be able to BOOT into the USB as an installer, as in have the. Maintain Windows XP Installing Windows XP Service Pack 3 (SP3). Before You Install Service Pack 3. We recommend that you perform a full backup of the files that you keep on your computer to an external location, such as an external hard disk, DVD, CD, USB flash drive, or network folder. You can use the. This guide explains how to create a Windows bootable USB drive for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10. Creating a bootable USB drive will allow you to install Windows from the USB drive directly. To be able to install Windows from a USB, you need have one of the following: the ISO image of the Windows version.

Not too many years ago, before the USB stick came along, if you wanted to clean install Windows, it had to be done using the CD or DVD and an optical drive. Thankfully, things have moved on and users with a sufficient amount of knowhow have been able to get their copy of Windows onto a USB flash drive and install from it for a little while now. With the introduction of Windows 8 you can now even choose to install it using a USB flash drive from within the Microsoft Upgrade Assistant. Installing Windows from USB has some advantages such as not having to worry about, and it’s more convenient to carry around a tiny USB flash drive than optical media.

They are also a necessity for netbooks, small laptops and the increasing amount smaller form factor PC’s that no longer use ROM drives. And to add to that, can complete a Windows install a good bit quicker than an optical drive thanks to the much faster access times.

Here we list 10 ways to enable you to get your Windows install files onto USB flash drive taking advantage of the benefits it has to offer. For ease of use, we have listed which versions of Windows are supported for putting onto USB according to each tool’s author. The tools themselves should run on Windows XP to Windows 8. Make sure you have at least a 4GB USB flash drive to hand before trying to perform a Windows to USB, portable versions of the software were used where possible. If you don’t have one, you can directly download a. WinToFlash USB install support for: Windows XP, 2003, Vista, 2008, 7 and 8. The WinToFlash utility has quite a lot of options and support for installing from XP right up to windows 8 using a USB flash drive.

In addition to Windows, there are also some other related functions such as creating an XP/2003 recovery console and error checking. The program has 2 different modes which can be used depending on your experience level, a Wizard mode which offers to get you going in a few easy steps, or an Advanced mode which gives a wealth of options and more control over the whole process. The program requires you select a drive or folder as the source, not an ISO image. Sadly the setup installer includes the BetterInstaller adware and even the portable version contains adware on 1st run and also uses inline ads. WiNToBootic USB install support for: Windows Vista, 2008, 7 and 8.

WiNToBootic is designed solely to be a small and completely portable standalone executable that can get the Windows Vista, 7 and 8 install files onto USB flash drive with the minimum of fuss. A useful feature not immediately apparent is you can click on the source arrow to locate an ISO file to be converted, or you can alternatively drag and drop an ISO, a folder containing the Windows files or even an install CD/DVD from My Computer. Simply make sure your USB drive is selected if not already, choose whether to format or not and press the Do it!

Windows Xp On Usb Drive

WiNToBootic is one of the quicker programs at completing the process and also one of the easiest to use. The.NET Framework v2.0 is required. Rufus USB install support for: Windows XP SP2+, 2003, Vista, 7 and 8. We’re quite big fans of Rufus because apart from being a great little tool to format USB drives and also check them for errors and bad blocks, there is also direct USB support to install, various Linux images and you can install Windows from XP SP2 up to 8. Rufus is also very reliable and one of the fastest tools around at getting the Windows install files onto the USB drive while still being easy to use.

Simply click on the select ISO icon and find your Windows ISO image, then click Start and wait for the process to complete. Nothing else needs to be touched as the program will select the best file system and name for you. Rufus is a completely portable executable and is less than 500KB. WinUSB Maker USB install support for: Windows XP, Vista, Server 2003/2008, 7 and 8. Josh Cell Softwares make some other nice tools such as and, while WinUSB Maker is a smart tool that can install just about any version of the Windows install CD/DVD from XP to 8 onto USB. It can also install a Linux Grub loader or MS-DOS if you wish, and includes a nice addition of a full USB backup and restore function to make a copy of the flash drive before putting Windows onto it. Another thing some users might find useful is the ability to work with and install using either an ISO image file or a directory with the extracted files if you have been slipstreaming or editing the Windows distro.

WinUSB Maker is a standalone executable and requires the.NET Framework v4.0 to run. Windows 7 USB/DVD download tool USB install support for: Officially Windows 7, also worked for us with Vista / 8. This is Microsoft’s official tool for putting the Windows 7 setup onto a USB stick and has a disadvantage over most other tools of this type by requiring installation before creating an install USB drive. Microsoft says it only supports Windows 7 ISO images, but we also successfully booted and installed both Vista and Win 8 from USB using this tool.

The program is a breeze to use and can easily put the image onto USB or burn it out to DVD if you want. Just follow the 4 easy steps and the Windows install USB will be created, although the speed at which the program creates the USB is known to be a bit slower than most other USB installer tools.

Hi everybody, my main issue with traktor pro is a sporadic crackling sound. My system is mbp 2.4 with 4gb ram and a vestax vcm-100 controller. That's also not the problem. With new tracks the problem is also there. Latency is also not the problem. It doesn't matter if you set the value to 5 or 60 milliseconds. I've just installed the new version of traktor, and I cannot go back to the previous version as both laptops were wiped clean. When using my laptop speakers. Audio 6 soundcard there is a crackle and pops on every song. Not very loud but you can notice it and it's very annoying. Hey everyone, Ok so i have had traktor pro 2 for around 5 months now and its awesome. Recently im having some problems tho. When I play tracks I get a crackling sound through my speakers, its very annoying. It never happened until recently I changed the 4 port USB hub I have to a new one as the first. Hey everyone, Ok so i have had traktor pro 2 for around 5 months now and its awesome. Recently im having some problems. The version I am using is 2.0.3 because when i upgraded to 2.5 it kept crashing over and over (Native Instruments are getting back to me about that). It Happens in all the versions I.

Requires the.NET Framework v2.0 or higher. We have another 5 tools to put the Windows install files onto USB on page 2. You don’t need the Bootsect argument at all if you’re using Vista/7/8 to put Vista/7/8 install files onto USB, that’s why it’s noted in the article the listed method is for those operating systems only. When Windows formats a USB drive it will install the correct bootsector for that Windows version already; Vista/7/8 will install nt60, XP will install nt52. The Bootsect.exe command only becomes useful if you’re on XP and trying to create a Vista/7/8 bootable USB or vice versa.

But then you run into problems of needing extra discs and not being able to create a 64-bit USB from a 32-bit Windows etc In short, the “bootsect /nt60 drive” command is pointless when XP isn’t involved. Excellent info – saved me as most of my systems refuse to boot from the Win7 DVD though they can boot the Vista DVD. Need to boot from the installation DVD since I’d like to wipe the HDs (non-upgrade install) as part of the install. Your manual way with Win7’s DiskPart I’d not seen previously – nice and easily done (fast too). I was working with the older HP USB Formater utility – to make a boot USB but its formating was taking 2x as long.

Found your post during its formating, started a second USB drive with your method – its done and the files are copied – HP Formater is still chugging along Thanks Again! I think using the Ultra ISO Premium is more ‘automatic’ The Steps are: 1) Download the free UltraISO trial-ezbsystems.com/ultraiso/download.htm 2) Start UltraISO as administrator (if Vista) 3) “Burn” the iso image to the USB stick by following these steps With UltraISO: – Open the image of Vista/Win7 with UltraISO – Under BOOTABLE tab choose WRITE DISK IMAGE – Choose your USB stick under “Disk Drive” – Choose a method (It’s recommended to use USB-HDD+) – Press Write – Make sure to change your BOOT order in BIOS to boot from your USB drive first THAT IS ALL!!!